ABOUT TWINOXIDE®

TwinOxide® is a unique and advanced delivery system, providing 99.9x% pure chlorine dioxide solution in a 0.3% concentration without by-products. It is applied as a (drinking) water disinfectant. TwinOxide® is delivered as a powder kit of two components. Once added to a specific volume of water, TwinOxide® reacts to a 99.9x% pure chlorine dioxide solution with a kinetic halftime as a biocide of 30 days. As water contamination levels vary, it is easily possible to vary the dosage rate of TwinOxide®.

In general, 1 liter of TwinOxide® 0.3% solution, with a dosage rate between 0.05 - 2.0 ppm will produce up to 60,000 liters of potable water. Deviations of these dosage rates are likely.

TwinOxide® delivers a superior disinfection capacity without harmful by-products, side effects or hazards. The environmental impact of TwinOxide® is negligible. The only residual product of TwinOxide® is a minute amount of harmless salt.

TwinOxide® is easy to transport by road, sea and air. It is safe to handle and simple to apply, using standard available dosing equipment and without the use of a reactor.

TwinOxide® uses different chemical precursors than conventional methods for the generation of chlorine dioxide. TwinOxide® does not generate by-products, is not explosive and has an indefinite shelf-life and remains active as a biocide far longer than chlorine. TwinOxide® 0.3% solution can be transported without notable hazard or risk.